"HEATING QUILTING BOMBER" from LANTERN is now in stock!

MODEL: MOA-LAN-04
FABRIC: NYLON RIP STOP (Silay processing) PADED: GRAPHENE 180g/ m²
Lining: Graphene Rip Stop
(with rechargeable battery)

[Product Features]

This new bomber jacket from LANTERN, which has MIL-SPEC as its brand identity, is a modern take on the bomber jacket (flight jacket) worn by fighter pilots. It features a short length designed for the cramped interior of a cockpit. Large diamond quilting, which secures the body fabric and padding, adds a touch of design flair, while the sleeve pattern has a forward flare for a three-dimensional finish, enhancing mobility and a unique silhouette. The interior pockets are upgraded versions of those found on the LEVEL7 military outerwear, offering more functionality. Designed with the theme of "choosing to wear it instead of a bag," the mesh and multi-function pockets offer complete functionality, allowing you to go out hands-free. The outer fabric is made of micro ripstop with a sheer finish.
This outerwear has an elegant sheen, is extremely lightweight, and highly functional. It features a slightly larger fit for outerwear. It comes in three sizes: 2 (M), 3 (L), and 4 (XL). It can be worn by both men and women, making it unisex. It's available in two colors: black and purple.
-The heating device warms the back area and allows for temperature adjustment.
- The water-repellent fabric used for the outer material is stain-resistant and repels water droplets.
- Uses padding and lining made of graphene, a carbon-derived fiber with excellent thermal conductivity.
Efficient heat conduction delivers optimal performance at low temperatures and low power consumption.
The graphene-based padding has a high air capacity and is bulky.
It is lightweight and has excellent heat retention properties.
The back collar is attached with LANTERN logo printed tape with laser-cut black reflectors. The sleeves have black reflective piping that reflects light in the dark, letting others know where you are.

[Features of Heating Device Wear]
This is padded clothing that allows you to adjust the temperature using the power and temperature adjustment switch on the left sleeve.
The heating device works by connecting a rechargeable battery to the USB plug on this product, and the switch changes color depending on the set temperature.
The heat plate, which is the heat source, is made from carbon fiber and warms the body from the inside out through far infrared rays.
The operating time of the heating device varies depending on the charged battery capacity and set temperature.

[How to use the heating device]
1. Place the rechargeable battery in the storage pocket on the left side and plug in the USB cable.
*Please also check the remaining charge of the charging battery and that it is powered on (that the battery protection function is not activated).
2: Press and hold the power switch on the left sleeve (for 2-3 seconds) until the LED flashes in four colors and the heating device is activated.
When the red (super hot) light is flashing, it is heating up rapidly.
If no switch operation is performed for approximately 5 minutes, the temperature will automatically change to purple (medium).
3: After turning on the power, you can change the temperature to your liking by briefly pressing the switch.
(※The light color changes depending on the temperature.)
4: Press and hold the power temperature switch on the left sleeve (for 2-3 seconds) until the LED flashes in four colors and the heating device stops.

[About rechargeable batteries]
USB output port: Output voltage: 5V, Output current: 2A or more. Estimated usable time (5000mAh)
Ultra-high temperature (red): 50℃/ 1.85H
High temperature (yellow): 40℃/2.5H
Medium temperature (purple): 30℃/3.75H
Low temperature (blue): 20℃/7.5H
(*The above figures are based on an ambient temperature of 5°C.)
The temperature and time are a guide only.
It is not an absolute value.

[ATTENTION]
-We recommend wet cleaning at a dry cleaner's.
Please see the washing label for details.
(* Be sure to remove the rechargeable battery.)
-This product was designed and produced as a supplementary heating garment to be worn over other clothing.
Do not use it for any other purpose.
- Please use with caution to avoid low-temperature burns.
-Please note that we cannot be held responsible for any breakdowns, repairs, accidents, or other problems that occur if the product is used for purposes other than its intended use.

*Measurements are taken flat.

Wearing staff: Height 165cm, 60kg, wearing size 2 (Pani-o) / 162cm, wearing size 2 (Pani-mi)